Plug (previously known as Cemplug 6) is a pre-blended cementitious wall tie sealing compound. Or a plugging mortar. The plastic shrinkage characteristics are low and the set compound affords a high level of resistance to sulphate and other chemical attack when fully cured.


Plug is a cementitious based compound consisting of quality assured raw materials and specialist chemical modifiers designed to provide rapid set and anti-washout properties. The compound is chloride free.


Plug is designed for plugging tie holes and when filling holes formed by through ties, the plastic pipe remaining in the wall should either be removed or drilled back from the concrete face by approximately 50mm then plugged with a tie stopper to form a backing for compacting the Plug against.

Product Downloads

Plug Brochure
Plug technical spec sheet
Plug Material Safety Datasheet

Call 03444 630 046 to order this product

Request a call back